Meaco Stainless Steel 300iS With LPHW Wall Mounted Swimming Pool Dehumidifier (54 Litre)

Meaco have been selling dehumidifiers for almost twenty years and have been looking for a swimming pool dehumidifier to put there name to for a while and they are delighted to finally be able to endorse this range of swimming pool dehumidifiers.
The 300i/500i/800i and 1200i are made for us to exacting standards within the European Union with each one been individually tested before it's leaves the factory.
Build standards for swimming pool dehumidifiers have to be high because of the aggressive nature of the chemicals and the high humidity.
This makes them a good choice for other applications that require wall mounted dehumidifiers because of the superior quality of the parts used.
Customers should note though that this range is only designed for heated areas above 15°C.
As standard the dehumidifiers dry the air and re-warm it to 2°C warmer than it came in.
If you want the dehumidifier to heat the room air then it can using an optional extra called Low Pressure Hot Water (LPHW) heating.
This allows you to connect the dehumidifier to your boiler and the air can be heated via a hot water pipe that passes through the dehumidifier.
Other options include through wall mounting and a remote wireless humidistat
Extraction rate at 30°C and 80%rh 54 litres per day
Humidistat Yes, manual
Continuous drainage option
Auto restart
Noise level 44dBa
Power Supply Normal British 230V, 50Hz
Average Power Consumption 750W
Total heat delivered to the air 900W
Nominal running 4.4amps, protection required 10 amps
Condensate drain 16mm diameter
Air Flow 440 cubic metres per hour
Operating Temperatures 15....35°C
Refrigerant R407C
Tank Continuous drainage only